Sheldon - for my 6 string Z2 I have 2 different sets of strings that I purchased from you. Nickel .(030 .045 .055 .080 .100 130) and Stainless Steel (.030 .045 .058 .075 .098 127). I have being using the stainless steel for a few years. If I put o...
Klowdon Registered
No Ranking
(sorry for my mistakes im French) Hi Mr Sheldon, first of all bravo for your amazing work. Questions : I saw dingwall pickups on bassdirect.co.uk and they told me it were genuine parts. Is it true? If yes I would like to get to get 3 FD3N for my ...
GuenaelSoum Registered
No Ranking
In the attached photo you will notice some corrosion on the bridge of my ABZ. First off, has anyone else reported anything like this before? I'm not 100% sure of the bridge material, but I thought it was anodized aluminum with steel saddles? Secon...
Redwood Registered
New Member
I used my dingwall for years with no issue however it finally moved and needs a setup bad. Is there ay instructions and or specifications on how to set up? I want to do it myself and purchase any necessary tools to do so. I have other basses to rec...
No Ranking
Hi Sheldon. I just recently got an ABII, with the cocobolo top from a limited run of 12, and installed new Dingwall strings set. One thing puzzles me. I think it has nothing to do with bass itself, but with the strings. The tapered B (and tapered E t...
dimitrio Registered
No Ranking
What happened to that beautiful super J5 from NAMM 2019? Was there a buyer already arranged or did it end up in inventory at a dealer location. I recall the basses from previous NAMM shows used to show up from time to time available for purchase off...
No Ranking
good morning, can I ask you what is the value for a 2015 Dingwall ABHS (no more producted), darkglass electronic, 2 pick ups, white finish, Wenge neck and Wenge fretboard? Thanks...
RicBor1993 Registered
No Ranking
Hi, I am looking for a Dingwall Super J5 bass. If you've got one that you'd like to sell, please let me know! Thank you in advance! Best Regards, Peter Lufrano...
PeterLufrano Registered
No Ranking
I'm looking to buy a Super P or PJ. I'm preferring a 4 but will consider a 5. I prefer swamp ash bodies. Maple/maple neck only, no Pau Farro. I'm looking for your basic 4 string, a simple bass, and if it's black, perfect....
No Ranking
Wow, things have sure changed since I was here last! Now before you laugh, it's for resin casting. I've been having problems with small air bubbles and I've seen this used before and it looks like it works. Does anyone have any ideas for ...
TheGrandEnigma Registered
Expert Member
Been getting some nasty clipping with the NG3, especially when I try and run it through the AxeFX with the B7K enabled. I have pretty middle of the road output settings for all my dials, and I even dropped the output on my AxxeFX preset to see if it ...
TheMD93 Registered
No Ranking
Hi all. New NG2 owner here and absolutely loving my first proper bass. I just wanted to check whether I can leave my NG2 plugged into my AxeFx all the time without having the batteries drain if I ensure I set the Darkglass from active to pas...
Samboway Registered
No Ranking
Really curious if anybody here has had success with tapewound strings on their basses? Love the feel of tapes and was wondering if anybody was able to use them with the Dingwalls...
MSFL27 Registered
No Ranking
Good Evening; Looking for some advice regarding how best to protect and prevent wear on the fingerboard of my new (have had it for two weeks) fretless ABII. This is a beautiful bass, sounds and feels amazing to play, but already starting to see a...
anirishscott Registered
No Ranking
Hi, Does anyone have a wiring diagram for a Dingwall Combustion NG3 (Darkglass) ?...
Ludovic Registered
New Member
Since one week I'm owner of a Z3. It has been taken 45 Years to discover that bass, which provides nearly all what I always thought a 5 string bass should provide. However there is one tiny little option which I'm missing using the PU selector: The c...
sepp Registered
New Member
June 5/2019...
loyash65 Registered
No Ranking
Hi Guys, I bought an NG3 recently and would like to change out all the chrome hardware to blacked out ones. I've a bad case of sweaty palms coupled with a tropical climate and that just isn't going to rhyme with chrome. So i've begun sourcing ...
justsaykk Registered
No Ranking
Hi, Sheldon! 2 years ago I bought Dingwall Combustion 5. Bass guitar began to make extraneous noises 1 year ago. Noise occurs unexpectedly in active mode and then appears in passive mode. I thought the problem was the batteries, but I tried differen...
SergeyDudin Registered
No Ranking
Sheldon, What polishes/cleaners would you recommend for cleaning/maintaining my NG2? I figure you'd know better than anyone what would work best on the neck/board and body. Thanks!...
alexpeters1208 Registered
No Ranking


There are no discussions available here currently