Been getting some nasty clipping with the NG3, especially when I try and run it through the AxeFX with the B7K enabled. I have pretty middle of the road output settings for all my dials, and I even dropped the output on my AxxeFX preset to see if it ...
TheMD93 Registered
No Ranking
Hi all. New NG2 owner here and absolutely loving my first proper bass. I just wanted to check whether I can leave my NG2 plugged into my AxeFx all the time without having the batteries drain if I ensure I set the Darkglass from active to pas...
Samboway Registered
No Ranking
Really curious if anybody here has had success with tapewound strings on their basses? Love the feel of tapes and was wondering if anybody was able to use them with the Dingwalls...
MSFL27 Registered
No Ranking
Good Evening; Looking for some advice regarding how best to protect and prevent wear on the fingerboard of my new (have had it for two weeks) fretless ABII. This is a beautiful bass, sounds and feels amazing to play, but already starting to see a...
anirishscott Registered
No Ranking
Hi, Does anyone have a wiring diagram for a Dingwall Combustion NG3 (Darkglass) ?...
Ludovic Registered
New Member
Since one week I'm owner of a Z3. It has been taken 45 Years to discover that bass, which provides nearly all what I always thought a 5 string bass should provide. However there is one tiny little option which I'm missing using the PU selector: The c...
sepp Registered
New Member
June 5/2019...
loyash65 Registered
No Ranking
Hi Guys, I bought an NG3 recently and would like to change out all the chrome hardware to blacked out ones. I've a bad case of sweaty palms coupled with a tropical climate and that just isn't going to rhyme with chrome. So i've begun sourcing ...
justsaykk Registered
No Ranking
Hi, Sheldon! 2 years ago I bought Dingwall Combustion 5. Bass guitar began to make extraneous noises 1 year ago. Noise occurs unexpectedly in active mode and then appears in passive mode. I thought the problem was the batteries, but I tried differen...
SergeyDudin Registered
No Ranking
Sheldon, What polishes/cleaners would you recommend for cleaning/maintaining my NG2? I figure you'd know better than anyone what would work best on the neck/board and body. Thanks!...
alexpeters1208 Registered
No Ranking
Hi, Are order for lefty NG3 opened ? Do you have an ETA for them? I would like to purchase a lefty 5 strings NG3, but i need to know those informations before Thank you very much...
Leftydingwall68 Registered
No Ranking
Hi Sheldon, I noticed on my Lee Sklar Signature build in 2010 a weak g-string. It is sounding really thin compared to the others. String- changing didn´t solve the problem. I tried the Dingwall stainless steels, Nickels and too the Steels and Nic...
gerry bassman Registered
No Ranking

Mach II

My Afterburner II has been putting a dopey grin on my face since..2004? Wow haha, but I remember the FD3 mach II becoming available a little while later & I'd love to try out the hotter bridge pickup. Can they still be ordered in these older pick...
slappy Registered
No Ranking
I have: 4 string Super PJ with Mando frets, 19mm spacing, and Medium thin C shape neck 5 string Afterburner 2 with (I assume) Banjo frets, 18mm spacing, and Medium thin C shape neck and am trying out: 5 string Sklar with Mando frets, 18mm spacing, ...
NaH Registered
Expert Member
A while back I bought a used Dual-P-5 pickup and pick guard to convert my Super J5 to P/J. Went to do the install today and find the hardware I got with the pickup only had 2 rubber tube height adjust spacers about 12mm long whereas the SF-5 original...
LowPhat Registered
New Member
?...
No Ranking
i have an older super J where you have to remove the pick guard to change batteries. When the battery dies ALL the controls create very loud noise, popping and movement noise except the tone control. so, changing pu configuration, volume are basica...
PeterF Registered
New Member
Hi, I just purchased an NG-3 Combustion 5 BK in Germany. (Great bass!) I was surprised that the bass came 'plain', i.e. without any documentation. I would like to get more info about my new bass (e.g. what kind of strings are on it / how is the ...
RidingShotgun Registered
No Ranking
I'd like to know what kind of cleaners I can use on my fretboard and on other parts of the bass (body, fretboard neck, bridge, etc). I'm planning to get the Music Nomad MN105 F-One fretboard conditioner but they state many times that it's only for...
MoDeSt0 Registered
New Member
Hi Sheldon I recently purchased a used 2014 Buckeye Burl Z3 that I beleive to be 3rd hand to me. It has a significantly lower gain (-6dB) than my 2016 Sklar which has (I believe) the same pickups. The Z3 has a trim pot on the back of the volume ...
Applejacks0 Registered
No Ranking


There are no discussions available here currently