1. LowPhat
  2. Ask Sheldon
  3. Sunday, 12 August 2018
  4.  Subscribe via email
A while back I bought a used Dual-P-5 pickup and pick guard to convert my Super J5 to P/J. Went to do the install today and find the hardware I got with the pickup only had 2 rubber tube height adjust spacers about 12mm long whereas the SF-5 original pickup uses much thinner grommet. So I have 2 of each and don’t know which one I need to buy 2 more of.
Also my bass is routed to fit the P pickup but does not have holes drilled for the mounting screw bushings. What size drill do you recommend for these holes?
Last, what is the recommended distance between the pickup and string?
There are no comments made yet.

There are no replies made for this post yet.
However, you are not allowed to reply to this post.