Friday, 10 June 2022
  0 Replies
  18 Visits
0
Votes
Undo
  Subscribe
The single girder overhead crane or single girder bridge crane consists of one girder beam supported on each side by an end truck. The trolley and hoist are most commonly underhung, which means they run on the bridge's bottom flange. In terms of design, the bridge can be either top running or under running.

For many applications and industries, single girder bridge cranes are the most cost-effective lifting solution. Single girder cranes use less material and are more compact and lightweight than double girder cranes, resulting in significant material, freight, and installation cost savings. Furthermore, because only one bridge beam is required, these systems typically have less deadweight, allowing them to use lighter runway systems and tie into the existing building support structure.

Single girder overhead crane, to be your reliable and economical lifting solution
The Yuantai Single Girder Overhead Crane has maximum rigidity for a low deadweight. This could reduce the load on the overhead crane runway.
The most cost-effective design would be your best option for material handling.
The lifting mechanism for the single girder overhead crane is an electric hoist with high handling speeds, providing you with outstanding geometry and exceptional traveling characteristics.
High design rigidity and stability, high cost-effectiveness, high efficiency, and good performance
-----
CD/MD wire rope hoist top running single girder ovehread crane
CD/MD wire rope hoist top running single girder ovehread crane design
Top running single girder overhead crane with FEM standard wire rope hoist
Top running single girder overhead crane design with FEM standard wire rope hoist
Low headroom single girder overhead crane with hoist trolley placed at one side of the main girder
Low headroom single girder overhead crane design with hoist trolley placed at one side of the main girder
Single girder overhead crane with special designed cd/md type low headroom hoist
Single girder overhead crane design with special designed cd/md type low headroom hoist
-------------
Under hung or suspension single girder overhead crane mounted on your ceiling structure
Under hung or suspension single girder overhead crane design mounted on your ceiling structure
Ceiling mounted single girder overhead crane with CD/MD electric wire rope hoist
Ceiling mounted single girder overhead crane design with CD/MD electric wire rope hoist
Explosion proof top running single girder overhead crane
Explosion proof top running single girder overhead crane design
Monorail crane , straight and curved monorail hoist crane
Monorail crane , straight and curved monorail hoist crane design
--------
A single girder overhead crane is a type of light duty overhead crane that has three mechanisms: a lifting mechanism, a crane traveling mechanism, and a trolley traveling mechanism. The lifting mechanism is made up of an electric hoist, en electric wire rope or electric chain hoist, a pulley, and a hook. The steel structure of a single girder overhead crane is made up of the main girder frame and the end carriage frame; the main girder is mostly made up of the I beam and steel plates, specifically the top flange, web, and I beam; and crossed Stiffeners are settled within the main girder box. The performance of the single girder overhead crane directly related to the steel structure's safety and dependability.
There are no replies made for this post yet.
Be one of the first to reply to this post!