Hi, Are order for lefty NG3 opened ? Do you have an ETA for them? I would like to purchase a lefty 5 strings NG3, but i need to know those informations before Thank you very much...
Leftydingwall68 Registered
No Ranking
Hi Sheldon, I noticed on my Lee Sklar Signature build in 2010 a weak g-string. It is sounding really thin compared to the others. String- changing didn´t solve the problem. I tried the Dingwall stainless steels, Nickels and too the Steels and Nic...
gerry bassman Registered
No Ranking

Mach II

My Afterburner II has been putting a dopey grin on my face since..2004? Wow haha, but I remember the FD3 mach II becoming available a little while later & I'd love to try out the hotter bridge pickup. Can they still be ordered in these older pick...
slappy Registered
No Ranking
I have: 4 string Super PJ with Mando frets, 19mm spacing, and Medium thin C shape neck 5 string Afterburner 2 with (I assume) Banjo frets, 18mm spacing, and Medium thin C shape neck and am trying out: 5 string Sklar with Mando frets, 18mm spacing, ...
NaH Registered
Expert Member
A while back I bought a used Dual-P-5 pickup and pick guard to convert my Super J5 to P/J. Went to do the install today and find the hardware I got with the pickup only had 2 rubber tube height adjust spacers about 12mm long whereas the SF-5 original...
LowPhat Registered
New Member
?...
No Ranking
i have an older super J where you have to remove the pick guard to change batteries. When the battery dies ALL the controls create very loud noise, popping and movement noise except the tone control. so, changing pu configuration, volume are basica...
PeterF Registered
New Member
Hi, I just purchased an NG-3 Combustion 5 BK in Germany. (Great bass!) I was surprised that the bass came 'plain', i.e. without any documentation. I would like to get more info about my new bass (e.g. what kind of strings are on it / how is the ...
RidingShotgun Registered
No Ranking
I'd like to know what kind of cleaners I can use on my fretboard and on other parts of the bass (body, fretboard neck, bridge, etc). I'm planning to get the Music Nomad MN105 F-One fretboard conditioner but they state many times that it's only for...
MoDeSt0 Registered
New Member
Hi Sheldon I recently purchased a used 2014 Buckeye Burl Z3 that I beleive to be 3rd hand to me. It has a significantly lower gain (-6dB) than my 2016 Sklar which has (I believe) the same pickups. The Z3 has a trim pot on the back of the volume ...
Applejacks0 Registered
No Ranking
I am selling a pair of pickups FD3n for 6 strings bass, previously on my Z2. Asking 110 us...
Grassi Registered
No Ranking
I experienced a weird high frequency oscillation at church this morning (sounded like very high feedback). It occurred when I switched the BluEQube on. The level in the FoH was way too low for it to be regular feedback and it was clearly related to t...
callum Registered
Senior Member
Looking to buy a 4-string SJ3X or 4 string SPJ. What do you have? Located in the USA....
engage757 Registered
New Member
Hi everyone, I'm planning on purchasing an NG2 six-string when they are released in 2018. My main tuning will be drop F# (F#-B-E-A-D-G), so that I can play along to eight-string guitars, however, I also want to be able to play along to seven-string ...
AlfieC Registered
No Ranking
Hey Sheldon, Regarding a fretless board. I've been doing a little research with my build coming up and one main question....... for now..... pops up. I've read that putting inlays, even to the extent of fretlines can cause an issue with being felt ...
Afterburner Nate Registered
No Ranking
Hi Sheldon, i got myself a new Combustion 5-string (2017 model - serial no. 02606) and i love it But one thing annoys me infinitely... i noticed a strange buzzing / rattling sound when playing without amplification. At first i thought this would...
Koernerbrot Registered
New Member
I hope this is the right forum to ask this..... I have a 4 year old ABZ which is starting to get shiny in areas where I anchor my thumb and around the knobs. It has been suggested to me to not worry about these areas and chaulk it up to an instrume...
Redwood Registered
New Member
I'm not sure if the maple wood will soak up any paint if I paint in the letters as best as I can, and then sand off the goofs. Also what kind of paint? Maybe just some model paint?...
kevinlane Registered
No Ranking
I recently bought a second hand 5 string combustion bass which I love.It has a natural finish, no pickguard and two traditionally spaced soapbar humbuckers with vol. vol. bass treble controls. On the back of the headstock it has a code 0052. Are you ...
SonorousBass Registered
No Ranking
I got an SJ4 that sounds very nice, but my recently acquired SJ5 sounds not att all that nice. I bought it second hand, and I think someone has tampered with the wiring. The bridge pickup sounds nice, but in parallel position the tone is very anemic ...
bassmayhem Registered
Junior Member


There are no discussions available here currently